| After-sales Service: | 2 Years |
|---|---|
| Warranty: | 1 Years |
| Movement Way: | Combined |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The substances are placed on the conveyor belt and flattened on the mesh belt of the dryer, so that the pieces are fully in contact with the heat carrier, they flow out from the last layer. The heat carrier is introduced into the dryer by the fan. The wind speed and wind pressure generated by the induced draft fan make the heat carrier fully and evenly spread on the bottom of the dryer. Since the lower pressure is greater than the upper pressure, the heat carrier moves upward and passes through Each layer of mesh belt makes thesubstances fully contact with the heat carrier to improve the drying efficiency.
1,Equipment photos
2,Raw material photos
| No. | Model | LX8-4-1.5-56PA | LX8-4-2-020B | LX10-5-1.5-70PA | LX10-5-2-025B | ||
| 1 | Maximum heating capacity (KW) | 125.6 | 200 | 157.1 | 250 | ||
| 2 | Maximum cooling capacity(KW) | 120 | 0 | 154 | |||
| 3 | Input power (KW) | 40.64 | 210 | 48.3 | 260 | ||
| 4 | Operating voltage(V) | 380V±3/50Hz | |||||
| 5 | Current (A) | 84 | 400 | 98 | 476 | ||
| 6 | Maximum temperature (ºC) | 80 | 90 | 80 | 90 | ||
| 7 | Control system | Touch screen curve control, system protection, etc | |||||
| 8 | Supply air pressure(PA) | 201 | |||||
| 9 | Fans(set) | 8 | 8 | 10 | 10 | ||
| 10 | Total air volume(m³) | 108000 | 108000 | 135000 | 135000 | ||
| 11 | Total air volume(set) | 8 | 0 | 10 | 0 | ||
| 12 | Compressor | Low pressure chamber fully enclosed vortex machine | Low pressure chamber fully enclosed vortex machine | ||||
| 13 | Refrigerant | Environmentally friendly | Environmentally friendly | ||||
| 14 | Throttle element | Thermal/Electronic | - | Thermal/Electronic | - | ||
| 15 | Evaporator | Copper tube aluminum fin | - | Copper tube aluminum fin | - | ||
| 16 | Condenser | Copper tube aluminum fin | SUS304 | Copper tube aluminum fin | SUS304 | ||
| 17 | Heat recovery device | Aluminum fin | |||||
| 18 | Transmission structure | Single layer independent | |||||
| 19 | Transmission speed | Single layer independent frequency conversion | |||||
| 20 | Shaft Diameter(mm) | 60 | 68 | 60 | 68 | ||
| 21 | Load-bearing support bar | Optional load-bearing capacity | |||||
| 22 | Reducer | Hard tooth surface | |||||
| 23 | Material spreader | Rolling/Fork | |||||
| 24 | Feeding device | Customized | |||||
| 25 | Discharge device | PVC/mesh | |||||
| 26 | Thermal insulation materials | 50mmPolyurethane (optional 100mm) | |||||
| 27 | Length (m) | 8+ | 8+ | 10+ | 10+ | ||
| 28 | Width m) | 2.5 | 2.5 | 3.5 | 3.5 | ||
| 29 | Heigth(m | 2.5 | 2.5 | 3.5 | 3.5 | ||
| 30 | Material | Carbon steel/stainless steel | |||||
| 31 | Installation | Skid mounted/ on-site assembly | |||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}